Our Downlight Mitt Cover product is designed to fix insulation and air leakage inefficiencies with recessed lighting. Installable from below the ceiling, this product is only usable with selected LED Downlight Fittings (recommended wattage of up to 10-13W). The Downlight Mitt (in combination with a supported LED product), provides a significant improvement in the efficiency of Australian homes, as well as being installable from below the ceiling. 10 Year Warranty when installed once from below the ceiling!
IMPORTANT! There maybe other cheaper products on the market, but they may not comply to AS/NZS 5110 Barrier Standard, they sometimes also need to be assembled with wire fixings on-site and they may not have a place to cable tie control gear. Be sure to check that you are comparing our product with a Cover that complies to the barrier standard called up by AS/NZS 60598.
Halogen Downlights turn your roof into Swiss cheese allowing hot air during winter to rise into the roof-space which equates to energy loss, and in summer allowing hot air in your roof-space to expand and push down into your living areas.
The Downlight Mitt is a non-ventilated downlight product which focuses on fixing the inefficiencies of Downlights. The Downlight Mitt is made out of an intumescent/insulative material taking downlight safety to a new level, while also providing an R-value of 0.5 above the luminaire. The Lamp is energy efficient and also includes a silver backing which forces light and most of the heat downwards away from the roof and the back of the light fitting. This Downlight cap product is designed primarily for Gimble fittings which have significant gaps for maneuvering the direction of light output. Installation of the Downlight Mitt can be done from above or below the Ceiling. Mastic must be used when installing from above.
The Downlight Mitt is designed to change the general operation of a Downlight, to fix draughts, R-value consistency of insulation and Energy efficiency of Downlighting.
We can supply our products overseas, USA, Europe, Asia, Australasia. Contact us for costs.
Refer to Specifications for the Downlight Mitt installation Recommendations.