Loft Mitt Cover for In ceiling Speakers and Downlights enabling fire Ratings and sound proofing, with energy efficiency.
The Ultimate balanced solution allowing a larger heat dissipation area with an install from below the ceiling.
IMPORTANT! There maybe other cheaper barrier products on the market, but they may not comply to AS/NZS 5110 Barrier Standard, they also need to be assembled on site and they normally do not have a place to cable tie control gear.. Be sure to check that you are comparing our product with a Cover that complies to the barrier standard called up by AS/NZS 60598.
Here is an example of how our Loft Mitt downlight cover product performs with the use of Thermal Imaging. Comparing the insulative qualities of our product compared to an Earthwool R3.5 Insulation Batt. Downlights were not turned on for 24 hours to produce this image. Outside temperature was 10˚C and inside air was 23.6˚C. Our Downlight covers make a weak point of the building envelope into a strong point, improving the effectiveness of the over all R-value of your insulation. All this with a 10 Year Warranty.
5% Gaps in insulation can equate to a 50% reduction in insulation effectiveness
Plastic, Cardboard and Metal Downlight covers just don’t cut it!
Key Features of this product are:
- It complies to AS/NZS 5110 with a combination LED Fitting or LED control gear.
- It includes a transformer holder
- It is made of a proven insulative material
- It provides sound proofing
- It has a Fire Rating up to 2 hours (the material expands towards a fire)
- It helps eliminate the Draught Effect
- It is installable from below the ceiling up a 95mm hole
- 10 Year Warranty, with a single installation from below the ceiling.
Being a cover that includes an R-value, unlike other downlight covers, this cover is restricted to only be compatible with LED lighting of wattage up to 20w to ensure a long lamp life. Other downlight covers on the market are not restricted but are also not insulative.
The Loft Mitt is an Insulation installers’ best friend, passing stringent standards with ease and enabling energy efficiency with its R-value and draft proofing of recessed light fittings or In-ceiling speakers. Primarily a cover that is installed from above the ceiling, this Cover can also be installed from below the ceiling up a 95mm hole, recessed lighting fitting or in-ceiling Speaker. This is the largest downlight cover in the family enabling quick and easy installation over LED fittings. The Downlight cover is made of an insulative, sound proofing and up to 2 hour fire rated material, allowing the installer to have piece of mind for safety with lighting and sound performance/proofing for in-ceiling speakers.
Have a look at the product Specs for the dimensions of this cover compared to others in the family for compatibility with fittings or in-ceiling speakers. Also take a look at our test reports for this cover on the right hand side of this page.
This cover enables insulation to be installed all over the Lighting fitting/in-ceiling speaker to enable, fire rating, sound proofing and energy efficiency for heating and cooling no matter whether you have batts or blow in insulation.
Refer to Specifications for Loft Mitt installation Recommendations.